KT-12A

Active 12" 3-Way Line Array Loudspeaker

  • 12" bass-woofer, 6.5" mid-range woofer with 2" voice-coils
  • 1.4" titanium diaphragm tweeter with neodymium magnets
  • Nominal amplifier power : 1000W(LF), 600W(MF),240W(HF)
  • Nominal Impedance: 24Ω (HF), 8Ω (MF), 8Ω (LF)
  • Maximum Sound Pressure Level: 136dB (Peak)
  • 100° horizontal, 10° vertical dispersion pattern
  • Straightforward rigging system allows splay angles from 0° to 8°
  • Exceptionally wide frequency response: 60Hz to 19KHz (-/+3dB)
  • Bass-reflex configuration on 3-way models for extended low-end response
  • Made of sturdy, multi-layer birch plywood with tough black coating
  • Two water and dust resistant Neutrik NL8 connectors

Phonic is set to revolutionize line array technology with the introduction of the KT series. The KT series consists of
adaptable line array systems housed in attractive yet rugged trapezoidal enclosures. The series was designed to be easily
adaptable to any situation with easy configuration, low weight and versatility being prime concerns during development.


The KT-12A is a 3-way system encompassing a 12" bass-reflex woofer, 6.5" mid-range and 1.4" compression tweeter.
It features a high performance multichannel digital amplifier with 1840 Watts total output, a high-end 64-bit DSP and
superior AD-DA converters.


The onboard DSP provides convenient signal processing with latency less than 600 microseconds, offering such vital functions
as input/output delay, volume control, parametric equalization, crossovers, limiter, automatic temperature control and
system monitoring. System control and monitoring can be accomplished through USB and Ethernet using the included PC
software. Multiple units can be grouped within the software and have their properties adjusted simultaneously.


Complete with a flexible rigging system allowing for splay angles anywhere between 0° and 8°, the KT series is able to
provide coverage for any and every large venue. Expand your line array with multiple units and suspend for maximum
coverage. PowerCON power input and link connectors allow multiple units to be powered without the need for multiple AC
power cables. Please remember that setup and suspension of a line array should be done by qualified personnel only.


For a versatile, scalable system that can be flown or ground stacked – ideal for everything from theatres and concert halls
to stadiums and arenas – the KT line array systems definitely fit the bill.

Downloads

Data Sheet (English) (496 Kb) [Download]