They do indeed.  You will just need to select the device from the “Hardware Options” menu and select In01 (meaning channel input 1), In02, In03, etc. as the source for each individual track.

Sonic Station 16 has 8 direct outputs - one each on channels 1 through 8. They are unbalanced 1/4″ TS jacks, which send the signal post-fader, post-EQ, post-Low-cut filter, post-Mute.

Q: I’m very interested in the 442D, because I need a little mixer. I’m producing with just a Laptop, 2 Synths and turntables so my Question is: Is it possible to prelisten the audio signal on Channel 1 via Headphone (Fader is low!) while Ch. 2 is on full volume? Normally this is a typical feature on DJ-Mixers, but I just want to have 1 mixer.

Q: My computer is reading my Helix Board 12 just fine, but what software would you suggest I could use thats sophisticated enough to read the mixer and record at the same time?

A few messages have reached us, and we’ve discovered that certain Powerpod 620’s were shipped with the Digital Effect Processor in stand-by mode (obvious by the 2 small flashing lights within the EFX display).

1. Resource conflicts: go to the device manager… then view/resources by type. This will display all of the IRQ’s by number. You should then be able to see if any devices are sharing the same IRQ #.  If so then the easiest way to handle it is to disable the devices not being used during recording and create a ” hardware profile.”  You can search Microsoft help in windows if you are unsure of how to do this. Basically you are streamlining you OS to use only what it needs for recording, and disabling unnecessary component functions which can interrupt the recording (USB and Firewire don’t always play nice).
2. Question: is your firewire port a PCI card or built direct onto the motherboard?  Is the card a multiple device card ( i.e. USB, Memory card, Firewire all on same card)? If you have multiple types of ports on the same card, there can be issues.  We would recommend a PCI FireWire only card.
3. New Computer? If you have a new PC, it can come preloaded with all kinds of useles software, go to add/remove software and check what you have.  If you don’t use it - lose it! then do a disk cleanup and defrag (always be sure to save a restore point in System Restore before changing any software/hardware).
4. Windows Media Center: is a great OS from Microsoft, giving users new functions for audio/visual purposes, gaming, etc.  Some people use it with no problems.   However there are problems among many audio and video manufacturers with this OS.  We recommend Windows XP with service pack 2 or Windows Vista.
5. To continue on from the last point - Windows XP with Service Pack 2 should work great.  Service Pack 3 is another story entirely.  Although many users work with SP3 with no issues what-so-ever, the number of users who are experiencing problems with the Helix Board or Firefly due to this Service Park are plentiful.  We’d recommend users do not upgrade to SP3 if it can be avoided.
6. If the signal isn’t cutting out completely, but the audio is choppy, open up the Phonic Control Panel and try adjusting the buffer length.  Depending on the resources available on your computer, the latency of the audio signal may need to be adjusted.  If this solves your problem, you can either continue with the high latency or try to free up more system resources.  Make sure you ‘reset’ the driver after applying new buffer lengths.
7. While many IEEE 1394B cards will function without an issue with the Helix Board or Firefly, we would recommend using a FireWire card that is of the IEEE 1394A spec.  This is mainly due to the devices being developed under this spec, therefore is simply more ideal.  While many IEEE 1394B cards are perfectly backwards compatible, there just isn’t any guarantee that they will work flawlessly with our FireWire devices.
8. System resources can be taken up by background programs.   Please close any and all background programs possible, this includes any system tasks that are being run (for example, programs like RealPlayer or iTunes like to run their own update programs in the background. If you have the know-how to close these background processes, please do!).
9. Reducing the amount of graphics acceleration is greatly adviseable.  Particularly in Windows Vista, which is a very graphics-heavy operating system, this will take up more system resources than you can afford to lose.  In the Control Panel > Appearance menu, you should be able to reduce the amount of graphics acceleration in the ‘Advanced’ settings.   It may differ between operating systems, but it should be there somewhere.

Though advertised as including stereo power amplifiers, some users have been surprised to find that their audio is coming out mono.  Just to clarify, the power amplifiers in the Powerpods 620 and 740 are indeed stereo - and they work independently of one another - however the mixers themselves are mono.  Therefore, stereo devices connected to the ’stereo’ input channels on these mixers will have their audio summed and sent through as a mono signal.

Though the FireWire return signal cannot be routed to the AUX inputs, if users want to add additional effects to the return signal they are able to route the signal to the Control Room outputs using the “FireWire & 2T Return” button in the Control Room section.  Use the Control Room outputs to send the signal to the external processor, and return these signals through the AUX Returns as you normally would.

If you would like to directly monitor the tracks you are recording in Cubase (or other DAW software - though we’re sticking to Cubase for the purposes of this article), first you will need to set your tracks up in Cubase.  Once you’ve done so, and you’re ready to record, click the small speaker icon in your track details (seen in the image at the bottom of this article).  This button will allow you to directly monitor your recorded audio.  The signal will be returned directly to the Helix Board or Firefly unit for monitoring.

Both the USB and FireWire Helix Boards and Fireflys have “zero” or “near-zero” latency, meaning that they have no noticeable delay. Latency can be caused by a bottle-neck somewhere between your mixer/interface and your DAW software.  Quite commonly, your interface will not send the signal fast enough to the computer, causing the delay; however this is not the case with the Helix Boards and Fireflys.